Table of Contents
Advertisement
How To Set Temperature
1. Connect the iron to a suitable
mains supply outlet.
2. "Beep" sound would be heard
and the LCD would display all
logos for a Second then turn off.
3. Press "Temperature up / ON
OFF" button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and the
steam indicator ( ).
4. Press "temperature up" button
to raise the temperature set-
ting from Acryl to Linen; press
once the temperature setting will
8. Press once the steam button for
the continuous steam ironing, the
steam icon (
) will display on the
LCD with a beep sound.
9. Double continuous beep sound
would be heard and LCD would
display the steam off indicator
( ), if press the steam button
for the lower and medium tem-
perature settings (Acryl, Nylon,
Silk, Poly, Blend & Wool).
10. The iron is ready for use.
First Time Ironing
1. Remove any protective films or
stickers from the soleplate and the
cabinet if any.
2. Unwind and straighten the
power cord.
3. Fill the iron as described in
"How To Fill Water".
4. Connect the iron to a suitable
mains supply outlet.
change with a "beep" sound,
press "temperature down" button
for the reverse order setting.
5. The "Fabric type" will flash to
indicate that the iron is heating up
or cooling down.
6. When the iron attained the ap-
propriate temperature, the" Fabric
type" will stop blinking with a beep
sound.
7. For the better performance, the
steam only available for the high
temperature range (Cotton, Jeans
& Linen).
5. "Beep" sound would be heard
and the LCD would display all
logos for a Second then turn off.
6. Press "Temperature up / ON
OFF" button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and the
steam indicator ( ).
7. Set the MAX temperature, to
see "How To Set Temperature".
8. Press once the steam button for
the continuous steam ironing, the
steam icon (
LCD with a beep sound.
9. The iron is ready for use.
10. Begin first time ironing with an
old towel.
11. Press and hold the "Tempera-
ture up / ON OFF button" 3sec the
LCD display will off with a beep
sound.
12. Disconnect the iron from
mains supply outlet.
7
) will display on the
Advertisement
Table of Contents
