Steam Ironing; Vertical Steam; Automatic Shutdown (Auto-Off) - Beko SGA6124D User Manual

2 Operation
• If you press the steam button (11)
while the water reservoir is empty,
three steam level symbols other
than the first level and the smart
mode symbol light flash as shown
in the figure.
C
• When user presses function but-
ton after installing the tank with
water, the light will return to pre-
vious mode.
• Your appliance is suitable for using
with tap water. If your tap water is
excessively hard, we recommend
you to use a mixture of tap water
and potable water.

2.7 Steam ironing

• Operation of the pump may make
some noise during the water
drawing process; this is normal.
• The appliance starts in Smart-
ECO mode in the initial use. This
C
level offers safe temperature and
steam amount for all the fabrics
that can be ironed.
• When the icon light of the selected
setting flashes consistently on the
display, your appliance is ready to
iron.
Steam Station / User Manual
WARNING
• Your selection should be suited for
A
the fabric to be ironed.
• If the icon light on the display
blinks, this means that the sole-
plate temperature setting is not at
the desired level.
• You can do steam ironing by using
the steam trigger (11) at all tem-
C
perature levels except for "•".
• Your iron will raise steam from its
soleplate (7) as long as you hold
the steam trigger pressed.

2.8 Vertical steam

You can iron your curtains and
C
hanged garments thanks to the
vertical steam feature. Keep the
appliance 15-30 cm away from the
garment and curtains.
WARNING: Never direct the steam
to people or pets.
2.9 Automatic Shutdown
(Auto-Off)
• If you do not move the appliance
or press any of its buttons for 10
minutes, it will be shut down au-
tomatically.
C
• If you move the appliance horizon-
tally or press any of its buttons, it
will start to operate.
• It may take 60 seconds for the
soleplate (7) to reach the previous
temperature level.
15 / EN