Beko BKK 2141 User Manual page 13

Note:
− Only use the higher temperature
setting (Cotton, Jeans & Linen) for
the better result.
− It may be necessary to press the
burst of steam button a few times
to start this function. For optimum
steam quality, do not operate the
Burst Of Steam more than three
times in succession.
Build-in Anti-scale System
The build-in anti-scale cartridge is
designed to reduce the build-up
of lime scale that occurs during
steam ironing. This will prolong the
working life of your iron.
Note: The anti-scale cartridge will
not completely stop the natural
process of lime scale build-up.
Self-Cleaning
This function removes the scales
and minerals built up in the Steam
Chamber.
After steaming function has used
over 5 hours, the soleplate need to
self-clean and
flashed on the
1. Fill the iron as described in
"How To Fill Water"; fill the water
tank up to half.
2. Place the iron on a surface in
upright standing position.
3. Connect the iron to a suitable
mains supply outlet
4. "Beep" sound would be heard
and the LCD would display all logo
for a Second then turn off.
would be
LCD.
11
5. Press "Temperature up / ON
OFF" button once, the LCD would
display the fabric type (ACRYL),
temperature indicators (
the steam indicator ( ).
6. Select the 'Max' temperature
setting, See "How To Set Tem-
perature"
7. Depress and hold the "tempera-
ture up" button 3sec for turn off
the iron.
8. Disconnect the iron from mains
supply outlet.
9. Hold the iron horizontally over
a sink.
10. Press the Self-Cleaning But-
ton.
11. Steam and boiling hot water
will drain from the holes on the
soleplate washing away the scales
and minerals that have built up
inside the steam chamber.
12. Gently move the iron back and
forth until the water tank is empty.
13. Rest your steam iron back on
its heel rest and allow to fully cool
down.
14. Wipe the soleplate with a cold
damp cloth.
15. When the iron gets cool
completely, store it vertically in a
safe place.
Caution: Keep skin/body away
from the hot water.
) and