Troubleshooting - Uniden BW130 Owner's Manual

Problems
Power LED does not
light up after switch-
on.
An acoustic signal
sounds from the
parent unit.
No acoustic signal
sounds from the
parent unit.
The device switches
off automatically.

TROUbLEShOOTING

Possible Solutions
Check to ensure that:
• the AC adaptor is properly
plugged in.
• the batteries are full. Check if
the rechargeable battery needs
charging or is damaged (Parent
Unit).
Check to ensure if:
• the maximum range has been
exceeded
• the AC adaptor for the Baby Unit
is properly connected
• the Baby Unit is switched on
• the batteries are full. Check if
the rechargeable battery needs
charging or is damaged (parent
unit).
Adjust the volume on the Parent
Unit.
Replace the batteries or recharge
the battery (Parent Unit).
13