To Store The Table Saw Accessories; To Close The Leg Stand And Move The Saw - Performax 240-3605 Operator's Manual

ASSEMBLY

TO STORE THE TABLE SAW ACCESSORIES

Refer to Figure 10.
The table saw has three convenient storage areas (one on
Either side or back of the saw cabinet) specifically designed for
the saw's accessories. These accessories must be securely
stored. Remove the blade guard and anti-kickback pawls
assembly prior to closing the stand and moving the saw.
Figure 10

TO CLOSE THE LEG STAND AND MOVE THE SAW

Refer to Figures 11-14.
• Remove any workpieces from the tool.
• Remove the blade guard and anti-kickback pawls assembly.
• Remove and securely store any tools or accessories such as rip fence, mitre gauge, push stick, etc.
• Push the extension table closed.
• Lower the saw blade.
_ 16 _