Priority Of Operators - IBM TSO/E REXX User Manual

The result of this example is:

Priority of Operators

When more than one type of operator appears in an expression, what operation
does the language processor do first?
IF (A > 7**B) & (B < 3) | (A||B = C) THEN ...
Like the priority of operators within the arithmetic operators, there is an overall
priority that includes all operators. The priority of operators is as follows with the
highest first.
Thus the previous example presented again below:
IF (A > 7**B) & (B < 3) | (A||B = C) THEN ...
given the following values:
would be evaluated as follows:
1. Convert variables to values
2. Compute operations of higher priority within parentheses
Example using Concatenation Operators
/****************************** REXX *******************************/
/* This exec formats data into columns for output.
/*******************************************************************/
sport = 'base'
equipment = 'ball'
column = ' '
cost = 5
SAY sport||equipment column '$' cost
baseball $ 5
Overall Operator Priority
\ or ¬ - +
Prefix operators
** Power (exponential)
* / % // Multiply and divide
+ - Add and subtract
blank || abuttal Concatenation operators
== = >< etc. Comparison operators
& Logical AND
| && Inclusive OR and exclusive OR
A = 8
B = 2
C = 10
IF (8 > 7**2) & (2 < 3) | (8||2 = 10) THEN ...
Using Expressions
Chapter 3. Using Variables and Expressions
*/
35