Checklist #1: Creating And Editing A Data Set Using Ispf/Pdf - IBM TSO/E REXX User Manual

3. Write down the names of the data sets at your installation that are
4. Issue the LISTDS command for the first data set in each system file to
5. Write down the attributes of the first data set in your SYSEXEC
6. Write down the attributes of the first data set in your SYSPROC

Checklist #1: Creating and Editing a Data Set Using ISPF/PDF

1. Select the ISPF/PDF DATASET UTILITIES option (option 3.2).
______________________________________________
______________________________________________
allocated to SYSPROC.
First data set: ______________________________________________
Remaining data sets: ______________________________________________
______________________________________________
______________________________________________
______________________________________________
display the record format, logical record length, and block size.
To see the attributes of data sets used at your installation, issue the LISTDS
command for the first data set in each system file concatenation to display
something like the following:
READY
LISTDS 'sysexec.first.exec'
SYSEXEC.FIRST.EXEC
--RECFM-LRECL-BLKSIZE-DSORG
VB 255 5100
--VOLUMES--
TSO026
READY
LISTDS 'sysproc.first.clist'
SYSPROC.FIRST.CLIST
--RECFM-LRECL-BLKSIZE-DSORG
FB 80 19040
--VOLUMES--
TSOL07
concatenation.
RECFM = ______________________________
LRECL = ______________________________
BLKSIZE = ______________________________
concatenation.
RECFM = ______________________________
LRECL = ______________________________
BLKSIZE = ______________________________
Please Note
Save this information for use with the following checklists.
From the ISPF/PDF Primary Option Menu, select the UTILITIES option (option
3) and press the Enter key.
PO
PO
Preliminary Checklist
Appendix A. Allocating Data Sets
187