Skin Tone Dtl; Knee/Level - Panasonic AJ-HDX400P Operating Instructions Manual

Chapter 7 Menu description tables

7-3-8 SKIN TONE DTL

Item/ Variable
Data storage range
ON For selecting ON or OFF for the skin tone
$ SKIN TONE DTL
OFF DTL.
S C U F E
ON For selecting ON or OFF for ZEBRA in the
$ SKIN TONE
OFF SKIN TONE range.
ZEBRA
S C U F E
SKIN DTL CORING 0 For setting the SKIN TONE DTL coring effect.
:
<Note>
5
ZEBRA signals are superimposed only when
:
7 menu operations have been performed to
open the <SKIN TONE DTL> page and ON
has been selected as the SKIN TONE ZEBRA
item setting. Exercise care during operation
since these signals will be superimposed onto
not only the viewfinder but the main line
S C U F E system as well.
Y MAX 000 For setting the maximum luminance signal
:
value for applying the SKIN TONE effect.
190
:
255
S C U F E
Y MIN 000 For setting the minimum luminance signal
:
value for applying the SKIN TONE effect.
010
:
S C U F E 255
I CENTER 000 For setting the center position on the I axis
:
(setting the area to which the SKIN TONE
035
effect is to be applied).
:
255
S C U F E
I WIDTH 000 For setting the width of the area to which the
:
SKIN TONE effect is to be applied on the I
055
axis centered on the I CENTER.
:
255
S C U F E
Q WIDTH 000 For setting the width of the area to which the
:
SKIN TONE effect is to be applied on the Q
010
axis centered on the I CENTER.
:
255
S C U F E
Q PHASE –31 For setting the phase of the area to which the
:
SKIN TONE effect is to be applied as
+00
referenced to the Q axis.
:
+31
S C U F E
R-Y
Q-WIDTH
I-WIDTH
+ direction
I-CENTER
Q-PHASE
– direction
The underlining in the variable range column indicates the setting in the preset mode.
82
Remarks
Y-MAX
B-Y
Y-MIN
=SKIN TONE AREA
0

7-3-9 KNEE/LEVEL

Item/ Variable
Data storage range
MASTER PED –200
:
+018
:
+200
S C U F E
ON
$ MANUAL KNEE
OFF
S C U F E
KNEE POINT 70.0%
:
93.0%
:
107.0%
S C U F E
KNEE SLOPE 00
:
85
:
99 (98)
S C U F E
ON
$ WHITE CLIP
OFF
S C U F E
WHITE CLIP LVL 90%
:
S C U F E
109%
A.KNEE POINT 80%
:
93%
:
S C U F E 107%
A.KNEE LVL 100
:
107
:
109
S C U F E
A.KNEE 1
:
RESPONSE
4
S C U F E
<Note>
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Y
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to "7-6-2 CARD R/W SELECT."
Remarks
For performing the MASTER PEDESTAL
setting.
For setting the mode which is to be established
when the AUTO KNEE switch is at OFF. The
KNEE POINT/SLOPE setting value is active
when ON is selected.
For setting the KNEE POINT position in 0.5%
steps.
For performing the KNEE width setting.
Same as KNEE OFF when set to 0.
<Note>
The range of values that can be selected
using the AJ-EC3P is 00 to 98.
For selecting ON or OFF for the WHITE CLIP
function. The WHITE CLIP LVL setting value
is active when ON is selected.
For performing the WHITE CLIP LEVEL
setting.
For setting the AUTO KNEE POINT position
in 0.5% steps. This item is active when the
OUTPUT/AUTO KNEE selector switch is set
to CAM.AUTO KNEE ON.
For performing the AUTO KNEE level setting.
For setting the AUTO KNEE response speed.