High Setting; Addtional Dtl - Panasonic AJ-HDX400P Operating Instructions Manual

Chapter 7 Menu description tables

7-3-6 HIGH SETTING

Item/ Variable
Data storage range
$ MASTER GAIN –3dB For setting the master gain to –3, 0, 3, 6, 9,
:
12, 15, 18, 21, 24, 27 or 30 dB.
12dB
:
30dB
S C U F E
H.DTL LEVEL 00 For performing the H.DTL LEVEL setting.
:
10
:
63
S C U F E
V.DTL LEVEL 00 For performing the V.DTL LEVEL setting.
:
10
:
S C U F E 31
DTL CORING 00 For performing the DTL CORING setting.
:
08
:
15
S C U F E
H.DTL FREQ. 00 For performing the H.DTL FREQ setting.
:
25
:
31
S C U F E
LEVEL DEPEND. 0 For performing the LEVEL DEPEND setting.
:
3
:
5
S C U F E
MASTER GAMMA 0.35 For setting the MASTER GAMMA in 0.01
:
steps.
0.55
:
0.75
S C U F E
BLACK STRECH –3 For setting the gamma curve of the dark
:
areas.
OFF
:
S C U F E +3
OFF For selecting the color correction table.
$ MATRIX TABLE
A
B
S C U F E
ON For selecting ON or OFF for the color
$ COLOR
OFF correction.
CORRECT
S C U F E
<Note>
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to "7-6-2 CARD R/W SELECT."
The underlining in the variable range column indicates the setting in the preset mode.
7-3-7 ADDITIONAL DTL
Remarks
Data storage
KNEE APE LVL
S C U F E
DTL GAIN(+)
S C U F E
DTL GAIN(–)
S C U F E
DTL CLIP
S C U F E
DTL SOURCE
S C U F E
Item/ Variable
range
OFF For performing the KNEE APE LEVEL setting.
1
2
:
5
–31 For changing the DTL "+" direction level.
:
+00
:
+31
–31 For changing the DTL "–" (down) direction
:
level.
+00
:
+31
00 For changing the level at which the maximum
:
value of the DTL signal is clipped.
63
(R+G)/2 For setting the signal source of the DTL signal
(G+B)/2 components.
2G+R+B /4
(3G+R)/4
R
G
Remarks
7
81