Table of Contents
Advertisement
Chapter 7 Menu description tables
7-7-4 BLACK SHADING
Item/
Variable
Data storage
range
CORRECT
ON
For selecting ON or OFF for the digital black
OFF
shading compensation.
C U F E
DETECTION
—
For executing the digital black shading
(DIG)
compensation.
7-7-5 WHITE SHADING
Item/
Variable
Data storage
range
CORRECT
ON
For selecting ON or OFF for the white shading
OFF
compensation.
C U F E
DETECTION
–
For
(V SAW)
compensation.
7-8 VTR MENU
7-8-1 VTR FUNCTION
Item/
Variable
Data storage
range
HUMID OPE
ON
For selecting whether or not to continue
OFF
operation when HUMID alarm state has
occurred.
ON: Operation continues until tape slack is
OFF: Operation is stopped as soon as the
If the HUMID alarm state occurs during
recording, the recording operation will
continue unless tape slack is detected
regardless of whether ON or OFF has been
selected as this item's setting.
C U F
REC START
ALL
For selecting how recording start is to be
NORMAL
accepted.
C U F
PAUSE TIMER
10min
For selecting the time during which REC/
20min
PAUSE is to continue.
30min
60min
C U F
ECU REC CHK SW
R.REVIEW
For setting the unit's operation to be
RETAKE
performed using the REC check button on the
ECU.
R.REVIEW: The rec-review operation is
RETAKE:
C U F
The underlining in the variable range column indicates the setting in the preset
mode.
92
Remarks
Remarks
executing
the
white
shading
Remarks
detected even when the HUMID alarm
state has occurred during operation.
HUMID alarm state occurs.
performed.
The
retake
operation
performed, after which playback
is initiated automatically.
7-8-2 BATTERY/TAPE
Item/
Variable
Data storage
range
BATTERY SELECT
AJ-BP490
AU-BP402
HP-30A
PRO14
TRIM14
HYTRON50
HYTRON100
DIGITAL14
DIGITAL13
DIONIC
BP-H120
NP-L50
NP-L50D
ENDURA50
ENDURA80
ENDURA-D
BP-L60/90
NP-1B
TYPE A
TYPE B
C U F
EXT DC IN
AC_ADPT
AJ-BP490
SELECT
AU-BP402
HP-30A
PRO14
TRIM14
HYTRON50
HYTRON100
DIGITAL14
DIGITAL13
DIONIC
BP-H120
NP-L50
ENDURA80
ENDURA-D
BP-L60/90
NP-L50D
ENDURA50
NP-1B
TYPE A
TYPE B
C U F
BATT NEAR END
ON
ALARM
OFF
C U F
BATT NEAR END
ON
CANCEL
OFF
C U F
BATT END ALARM
ON
OFF
C U F
BATT REMAIN
100%
FULL
70%
C U F
TAPE NEAR END
ON
ALARM
OFF
C U F
is
TAPE NEAR END
3min
TIME
2min
C U F
TAPE END ALARM
ON
OFF
C U F
TAPE REMAIN/∫
5min/∫
3min/∫
C U F
Remarks
For selecting the type of battery to be used.
The
remaining
charge
is
detected
accordance with the battery which has been
selected.
The variable range is changed by the item
settings selected on the "7-8-3 BATTERY
SETTING1"
and
"7-8-4
SETTING2" menus.
Note that the initial value for TYPE A
corresponds to the PROFORMER and for
initial value for TYPE B to the HYTRON100,
both of which are manufactured by Anton
Bauer.
The variable range is changed by the item
settings selected on the "7-8-3 BATTERY
SETTING1"
and
"7-8-4
SETTING2" menus.
For setting whether or not to output the
warning tone when the battery charge is
nearly depleted.
When this item is set to ON, the warning tone
and the warning display which are being
output can be canceled by pressing the
MODE switch when the battery charge is
nearly depleted.
For setting whether or not to output the warning
tone when the battery charge is depleted.
For setting when the remaining charge display
bar on the LCD is to be displayed when a
digital battery is used.
70%: A full charge is indicated with a 70% display
100%:A full charge is indicated with a 100% display.
For setting whether or not to output the warning
tone when the tape is nearly at its end.
For setting the remaining tape time at which
to sound the warning that the tape has only
the designated amount of time (2min. or
3min.) remaining.
For setting whether or not to output the
warning tone when the tape reaches the end.
For setting the time of each segment (∫) that
makes up the remaining time display bar on
the LCD.
5min: Each segment denotes a remaining
time of 5 minutes.
3min: Each segment denotes a remaining
time of 3 minutes.
in
BATTERY
BATTERY
Hide quick links:
Advertisement
Table of Contents
