Installation - Danfoss Link RS Installation Manual

Installation Guide

Installation

The Danfoss Link™ wireless system's transmission range is
sufficient for most applications; however each building has
different obstacles affecting communication and maximum
transmission distance .
If communication problems occur Danfoss suggests that
accessories would be required to support the system, such as
repeaters . In exceptional cases the wireless system may not
be suitable for your installation .
Please be aware of the following, when installing Danfoss
Link™ RS:
Do not install Danfoss Link™ RS, where it will be subject to
direct sunlight.
The installation height should typically be between 80-
150 cm.
In wet rooms it shall be installed according to local
building regulations.
At least 50 cm away from windows/doors that will be left
open occasionally.
6
Danfoss Link™ RS
VIFZA35X © Danfoss 02/2011