Table of Contents
Advertisement
TH111C(e).book Page 38 Thursday, August 17, 2006 5:03 PM
F
Monitoring
Monitoring feature
This feature allows you to monitor the
room where a unit is located. The
monitored unit does not ring, allowing you
to easily monitor a baby's room, for
example, from different areas of the
house.
Enabling monitoring access
^
Y
To use the monitoring feature, you need to
set the destination unit to be monitored
beforehand.
– "Permit": allows the unit to be
monitored.
– "Deny": denies access from other units.
Handset
1
{MENU} (centre of joystick) i h i
{SELECT}
2
"Monitor access" i {SELECT}
3
Select the desired setting. (Default:
"Deny") i {SAVE} i {OFF}
Base unit
1
{MENU} i h i {SET}
2
"Monitor access" i {SET}
3
Select the desired setting. (Default:
"Deny") i {SET} i {STOP}
38
Audio monitor
This feature allows you to listen to the
audio in a room where the handset or base
unit is located.
Before using this feature, allow access
to the destination unit by selecting
"Permit" in the monitor access setting
(page 38).
Monitoring audio in a room
^
Y
Handset
1
{MENU} (centre of joystick) i F
i {SELECT}
2
Select the desired unit. i {SELECT}
L You can listen to the audio.
3
Press {OFF} to stop monitoring.
Base unit
1
{MENU} i F i {SET}
2
Select the desired unit. i {SET}
L You can listen to the audio.
3
Press {SP-PHONE} to stop monitoring.
Note for handset and base unit:
L To start monitoring quickly, press
{INTERCOM}, then press {*} instead
of step 1.
Advertisement
Table of Contents
