Panasonic KX-TH111C Operating Instructions Manual page 40

TH111C(e).book Page 40 Thursday, August 17, 2006 5:03 PM
Programmable Settings
Recording songs from an audio
device for ringer tones using the
handset ("Customise ring")
You can record songs (max. 30 seconds
each) from an audio device by connecting
the included audio cable. These songs can
be assigned as the handset ringer tone
(page 39) and the ringer ID (page 29) for
phone numbers stored in the handset
phonebook.
Important:
L If a call is received while a song is being
recorded or played back, recording or
playback stops automatically.
Disconnect the audio cable from the
handset to answer the call.
1
Connect the audio device (such as a
CD player or computer) to the handset
using the included audio cable.
Audio device
Headphone
output, line
out, etc.
Example:
Audio cable
2
{MENU} (centre of joystick) i f
i {SELECT}
3
"Customise ring" i {SELECT}
4
"Record" i {SELECT}
5
Start playing the audio device.
6
Press {REC.} to start recording.
7
To stop recording, press {STOP}.
L To listen to the recording, select
"Playback", then press {SELECT}.
40
L To re-record, select "Retry", press
{SELECT}, then start from step 5.
8
"Save" i {SELECT}
Y
9
Enter the desired name (max. 15
characters; page 23).
10
{SAVE} i {OFF}
11
Disconnect the audio cable from the
handset.
Note:
L The total recording time is about 120
seconds.
Playing back a song
1
{MENU} (centre of joystick) i f
i {SELECT}
2
"Customise ring" i {SELECT}
3
"Playback" i {SELECT}
4
Select the desired song. i {PLAY}
5
{STOP} i {OFF}
Erasing a song
While the song is selected or playing,
press {ERASE}, then press {YES}.
Note:
L If the erased song was used for the
handset ringer tone (page 39), "Tone 1"
(default) is used instead of that song.
L If the erased song was assigned to
certain callers as ringer ID (page 29), the
ringer ID assignment is cancelled, and
the handset ringer tone (page 39) is
used instead of that song.
Changing the name of a song
1
{MENU} (centre of joystick) i f
i {SELECT}
2
"Customise ring" i {SELECT}
3
"Edit title" i {SELECT}