Table of Contents
Advertisement
TH111C(e).book Page 60 Thursday, August 17, 2006 5:03 PM
Using a Cellular Phone with this Unit
Base unit
1
To put the land line call on hold, press
{HOLD}.
2
To make a cellular call
Dial the phone number, then press the
desired CELLULAR SELECT button
({1} to {5}).
To answer a cellular call
Press the CELLULAR SELECT button
({1} to {5}) that is flashing.
L To hold the cellular call, press
{HOLD}.
3
To return to the land line call, press
{SP-PHONE} to end the cellular call,
then press {SP-PHONE}.
60
Cellular settings
Important:
L You must register your cellular phone to
the base unit before programming.
Ringer settings for cellular calls
^
Y
Ringer volume
You can change the ringer volume heard
when a cellular call is received. You can
change it for the handset and base unit
individually.
Handset
1
{MENU} (centre of joystick) i f
i {SELECT}
2
"Ringer for cell" i {SELECT}
3
"Ringer volume" i {SELECT}
4
Select the desired volume. (Default:
High) i {SAVE} i {OFF}
Base unit
1
{MENU} i f i {SET}
2
"Ringer for cell" i {SET}
3
"Ringer volume" i {SET}
4
Select the desired volume. (Default:
High) i {SET} i {STOP}
Note for handset and base unit:
L When the ringer volume is set to off for a
cellular line, "Ringer off" is not
displayed in standby mode and the
handset or base unit does not ring for
cellular calls.
Advertisement
Table of Contents
