TP-Link EAP115 User Manual page 43

Click to add a new authentication policy and configure its parameters.
Policy Name:
Source IP Range:
Destination IP
Range:
Source MAC:
Destination Port:
Status:
Click the button OK in Figure 6-28 and the policy is successfully added as Figure 6-29 shows.
Figure 6-25 Configure Free Authentication Policy
Enter a policy name.
Enter the source IP address and subnet mask of the clients who can enjoy the
free authentication policy. Leaving the field empty means all IP addresses
can access the specific resources.
Enter the destination IP address and subnet mask for free authentication
policy. Leaving the field empty means all IP addresses can be visited.
Enter the source MAC address of the clients who can enjoy the free
authentication policy. Leaving the field empty means all MAC addresses can
access the specific resources.
Enter the destination port for free authentication policy. Leaving the field
empty means all ports can be accessed.
Check the box to enable the policy.
Figure 6-26 Add Free Authentication Policy
35