Option 2: Wired Login
Step 1: Power on
Power on the EAPs.
Step 2: Wired Access
1.
Make sure the management host is set to obtain IP address automatically.
2.
Access your DHCP server and locate the IP address of the EAPs.
Step 3: Choose the work mode
1.
Open a web browser, in the address field type in the IP address of the EAP to access the
EAP's web management page. The default user name and password are admin (all
lowercase).
2.
Choose the work mode in the drop-down box the first time you login. With factory default
settings, the EAP works in Standalone mode.
3.
Configure the EAP parameters. Please refer to the corresponding chapter according to the
work mode you chose.
Congratulations! Now you can enjoy the wireless network.
Figure 4-2 Sample Network Diagram for Wired Login
7