TP-Link EAP115 User Manual page 114

Active Time: Displays the amount of time the client has been connected to the device.
7.3.3.2 Portal Authenticated Guest
The Portal Authenticated Guest displays information about clients that have set up valid
authentication.
MAC: Displays the MAC address of the authenticated client.
Access Point: Displays the name of the device to which the authenticated client is connected
SSID: Displays the SSID the authenticated client is connected to.
SNR(dB): Signal to Noise Ratio, the power ratio between the received wireless signal
strength and the environmental noise strength. The bigger the value of SNR, the
better network performance the device provides.
CCQ(%): Displays the Client Connection Quality (CCQ) of the authenticated client. CCQ
refers to the ratio of current effective transmission bandwidth and the
theoretically maximum available bandwidth. CCQ reflects the actual link
condition.
Rate(Mbps): Displays the data rate at which the authenticated client transmits wireless
packets.
Down(Byte): Displays the throughput of the downstream data.
Displays the throughput of the upstream data.
Up(Byte):
Active Time: Displays the amount of time the authenticated client has been connected to the
root AP.
Action: Click Unauthorize to stop giving authorization to the clients connected to the
wireless network.
Figure 7-50 Portal Authenticated Guest
106