Greenlee GATOR LS100L Operation Manual page 10

Setup and Operation (cont'd)
MILD STEEL
Punching Mild Steel
• Square: 1/2" (0.500" / 12.7 mm)
• Rectangular: 7/16"x 7/8"
(0.437"x 0.875" / 11.1 mm x 22.2 mm)
05244
1/4" Counter Nut
Punching Mild Steel
• Square: 5/8" to 0.945"
(0.625" to 0.945" / 15.9 mm to 24.0 mm)
• Rectangular: 0.670" x 0.749"
(17.0 mm x 19.0 mm)
04638
3/8" Counter Nut
Punching Mild Steel
• Square: 1" (1.000" / 25.4 mm)
• Rectangular: 0.750"x 1.140" to 1.250" x 1.380"
(19.1 mm x 29.0 mm to 31.8 mm x 35.1 mm)
60258
1/2" Counter Nut
Greenlee / A Textron Company
LS100L Battery-powered Punch Driver
60115
1/4" Draw Stud
Die
Pilot Hole
Punch
60116
3/8" Draw Stud
Threads with Flats
Die
Pilot Hole
Punch
60117
3/8" Draw Stud
Die
Pilot Hole
Punch
10
60114
1/4" Adapter
03248
Spacer
End with
Long Threads
33967
3/8" Adapter
03248
Spacer
End with Long Threads
60167
1/2" Adapter
03248
Spacer
End with Long Threads
Threads with Flats
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070