Table of Contents
Advertisement
TRENDnet User's Guide
Choose one of the Ethernet duplex and speed to
Duplex and Speed:
match your network. Default: auto.
Maximum transmission unit. The maximum byte size
MTU:
Ethernet data field.
Enter your first IPv4 or IPv6 DNS server address
Primary DNS:
Enter your second IPv4 or IPv6 DNS server address
Secondary DNS:
IPv4
DHCP:
Check this box if the IP address is assigned by DHCP
server.
IPv4 Address:
Load complete factory default to the camera.
Subnet Mask:
Network range of the subnet
Default Gateway:
The default route going further from camera IPv4
subnet.
IPv6
IPv6 Mode:
Choose Manual, DHCP, or Route Advertisement. Click
View Route Advertisement to find a route
advertisement.
IPv6 Address:
IPv6 address of the camera.
Prefix Length:
Length of network prefix
Default Gateway:
The default route going further from camera IPv6
subnet.
Click Save to save the changes
© Copyright 2015 TRENDnet. All Rights Reserved.
Port
You can change the service ports number of the camera or disable RTSP or
HTTPS services.
Port Numbers
HTTP Port:
The default web access port. You can change the
port number. However, you cannot disable the web
service. The default port number is 80.
RTSP Port:
The Real-Time Streaming Protocol port for video
streaming. You can change the port number or
disable the service by uncheck the box. The default
port number is 554.
HTTPS Port:
The secured web service port. You can change the
port number, or you can disable the service by
uncheck the box. The default port number is 443.
Click Save to save the changes
TV-IP312PI
21
Advertisement
Table of Contents
