Table of Contents
Advertisement
Setup menu list (continued)
AUTO SW screen (continued)
Item
AGC
ATW
AF
RECORDING SETUP screen
Item
REC FORMAT
MCR FORMAT
80i REC MODE
80i MCR MODE
REC FUNCTION
ONE-SHOT TIME
INTERVAL TIME
PREREC MODE
MIC ALC
MIC GAIN 1
10
Display
mode
(Camera)
Sets the Auto Gain Control when the ON is selected in A.IRIS.
dB:
Performs the Auto Gain Control (max. 6 dB) in auto mode.
1dB:
Performs the Auto Gain Control (max. 12 dB) in auto mode.
OFF:
Does not perform the Auto Gain Control in auto mode. Initiates the
control of the gain selected by the GAIN switch.
ON:
(Camera)
Performs the ATW (Auto Tracing White Balance) function in auto
mode. You cannot select ON/OFF of the ATW function with the WHITE
BAL switch or the USER button when this is selected. However, if
ATWLOCK is assigned to the USER button, you can set the white
balance value with the USER button.
OFF:
Does not perform the white balance function in auto mode. This
performs the white balance function selected with the WHITE BAL
switch.
ON:
(Camera)
Performs auto focusing in auto mode. You cannot use the FOCUS
switch and PUSH AUTO button when this is selected.
OFF:
Does not perform auto focusing in auto mode.This performs the
focusing selected with the FOCUS switch or PUSH AUTO button.
Display
mode
(Camera)
Selects the recording format.
1080i/60i, 1080i/30P, 1080i/24P, 1080i/24PA, 720P/60P, 720P/30P,
720P/24P, 720P/30PN, 720P/24PN, 480i/60i, 480i/30P, 480i/24P,
480i/24PA
(MCR)
Selects playback or a 1394 input format.
1080i/60i, 720P/60P, 720P/30PN, 720P/24PN, 480i/60i
(Camera)
Select the recording mode for a 480i recording format.
DVCPRO0, DVCPRO, DV
(MCR)
Selects format for playback or 1394 input in the 480i recording format.
DVCPRO0, DVCPRO, DV
(Camera)
Selects the special recording mode. (Pages 46 - 48)
NORMAL, INTERVAL, ONE SHOT, LOOP
(Camera)
Selects the one-shot recording time. (Page 47)
1F, F, F, 8F, 1F, 1s
(Camera)
Selects the interval time for interval recording. (Page 46)
F, F, 8F, 1F, 1s, s, s, 10s, 0s, 1m, m, 10m
(Camera)
Sets PRE RECORDING to ON or OFF. (Page 46)
ON, OFF
(Camera)
Sets mic level auto control to ON or OFF. (Page 52)
ON, OFF
Set to ON to reduce distortion at high input levels.
This setting does not change the audio signal recording level. Use the
AUDIO control knob to adjust the audio signal recording level.
(Camera)
Sets the input level of the external microphone connected to the INPUT
1 terminal. (Page 51)
-0dB, -0dB
Description of settings
Description of settings
___indicates the factory setting.
Advertisement
Table of Contents
