Advertisement
Owner's Manual
AMP One
Stereo Power Amplifier with Internal Bridging
Congratulations on your purchase. We trust that you will enjoy the
value and quality of your AudioSource AMP One for many years to come.
To ensure that you get the best performance from this unit, please take
a few moments to read this manual. Also, be sure to retain this document
for reference.
Note: If any part of this product is damaged or missing, do not contact your AudioSource
dealer. Please call us directly at 800-435-7115.
© 1999 AudioSource, Inc.
Advertisement
Table of Contents
Related Manuals for AudioSource PROJECTONE
Summary of Contents for AudioSource PROJECTONE
- Page 1 Also, be sure to retain this document for reference. Note: If any part of this product is damaged or missing, do not contact your AudioSource dealer. Please call us directly at 800-435-7115. © 1999 AudioSource, Inc.
-
Page 2: Peak Limiter
INPUT LINE IN CD IN LEFT RIGHT Using the Controls (Front Panel) Power This front panel button switches the AMP One on or off. A multicolored LED indicates its power status. Speaker Selector The AMP One has two pairs of speaker outputs. Press button A to activate the A outputs. Press button B to activate the B outputs. - Page 3 Stereo Setup In this configuration, the bridging switch is off for stereo operation. Connect the line out jacks from a stereo preamplifier to the line in jacks of your AMP One. Next, connect your speakers to the terminals marked Spkr A (observing proper polarity: red for "+", and black for "-").
-
Page 4: Safety Instructions
Product Servicing In the event that your AMP One fails to operated properly, please contact the dealer where you purchased the unit. Or you may contact AudioSource directly for further assistance. Printed in Taiwan...
Need help?
Do you have a question about the PROJECTONE and is the answer not in the manual?
Questions and answers