Barco CSE-200 Installation Manual page 73

Image 6-45
Troubleshoot, factory defaults
3. Click Reset to factory defaults.
The following message is displayed: "This action will remove all settings of the Base Unit and replace them with the default
settings. Are you sure you want to continue?"
4. If you want to continue, click Yes, remove all settings otherwise click No, I changed my mind.
When yes is clicked, the system starts a reboot.
Alternative way: The Base Unit can be reset to factory defaults by plugging in the power cable while pressing
the reset button.
R5900023 CSE-200 11/04/2016
6. CSE-200 Configurator
61