Menu Function - Axis AX 1102BT Installation Manual

Bluetooth Operation
General Notes for Bluetooth
1. For some types of mobile phones, even
after the connection seems successful, the
unit still appears to be waiting to be paired.
At this time you must find the unit's Bluetooth
module name on the pairing list of your
mobile phone and select connect in the
submenu. Then the unit will display CONNECT.
To play back A2DP in some mobile phones,
find the unit name in the phone menu and,
reconnect (check if your mobile phone has the
A2DP & AVRCP functions).
2. When pairing, some types of mobile phones
give specific directions to operate.
3. Depending on the mobile phone, if private
mode is selected, voice will be transferred to
the mobile phone. Sometime the Bluetooth may
disconnect and may need pairing again.
4. For mobile phone, the Bluetooth device
name must be primary symbols or numbers.
5. After CONNECT, if no sound is produced,
please check that the Bluetooth stereo audio
on the phone is switched ON.

Menu Function

Press the knob for more than 2 seconds to enter
the menu. Then each press changes the
mode as follows:
— — — — — — — — — — — — — — — — — — — —
DSP mode
Rotate the knob to choose DSP sound effect:
POP -> ROCK -> CLASSIC -> FLAT ->OFF
— — — — — — — — — — — — — — — — — — — —
BEEP ON/OFF mode
Rotate the knob to switch the beep sound
on or off.
— — — — — — — — — — — — — — — — — — — —
SEEK 1/2 mode (in Radio mode)
Rotate the knob to choose radio seek mode 1
or 2.
SEEK 1: Station search will stop when the
next station is received.
SEEK 2: Station search will stop when |<<
or >>| button is released and next station is
received.
— — — — — — — — — — — — — — — — — — — —
VOL mode
Rotate the knob to choose volume last/adjust
mode.
V-LAST: The turn-on volume level is the
volume of latest power off.
V-ADJ: Press the knob to enter Volume Adjust
mode. Rotate to set the turn-on volume level.
— — — — — — — — — — — — — — — — — — — —
12/24 HOURS mode
Rotate the knob to choose time format: 12 or
24 HOUR.
EN - 8