Tuner Operation; Usb/Sd/Mmc/Mp3 Playback - Axis AX 1102BT Installation Manual

Tuner Operation

Band
During radio play, press the BAND button to
choose between three FM and two AM bands.
Up Tuning
Press the seek up >>| button to tune stations
step-by-step. The current frequency will be
shown in digital format on the display panel.
Press and hold the seek >>| button to the next
available station.
Down Tuning
Press the seek down |<< button to tune
stations downwards.
Press and hold the seek down |<< button for
the previous available station.
Auto Store
Press the AMS button to scan preset stations
1-6. Hold it to automatically select six strong
stations and store them in the current band.
The new stations replace stations already
stored in that band.

USB/SD/MMC/MP3 Playback

1. Load SD/MMC Card
button to flip down the panel. Insert
Press
the SD/MMC card into the slot, with the front
side to the right. Close the panel.
The unit will play the music automatically and
the LCD will show CARD.
2. Take out SD/MMC Card
Press SRC button and switch to non CARD
mode. Press
press the SD/MMC card. Remove the card when
it pops out. Close the panel.
3. Load USB Equipment
Open the USB cap to the right. Insert the
USB into the connector and the unit will
automatically play.
4. Take out USB Equipment
Press SRC button and switch to non USB
mode. Then remove the USB stick.
Close the cap.
USB/SD/MMC Notes
USB functions (flash memory type) MP3 music
play
1. SD/MMC card support
2. USB flash memory 2 in 1 (SD/MMC) support
3. FAT 12/FAT 16, FAT 32 is possible
4. Tag (id3 tag ver 2.0)
- Title/artist/album: 32 byte support
5. Multi card reader not supported
6. USB 1.1 support
USB 2.0 support
(It cannot support USB 2.0 speed.
Will play the same speed with USB 1.1)
Note:
Due to the great variety of recording formats, we
cannot guarentee that all kinds of USB & SD Card
devices are compatible with the unit.
EN - 5
to flip down the panel. Slightly