Speakers - HP 14-an0XX Maintenance And Service Manual

Speakers

Description
Speakers (left and right)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the cable from the routing path (2), and then lift up and remove the speakers from the
computer (3).
NOTE:
Reverse this procedure to install the speakers.
Battery on page
Optical drive on page
Bottom cover on page
The speakers are not secured with screws.
26).
27).
30).
Component replacement procedures
Spare part number
858083-001
41