Display Assembly - HP 14-an0XX Maintenance And Service Manual

Display assembly

This section describes removing the display assembly and disassembling display subcomponents.
Description
Raw display panel for use in HP Notebook PC models (includes insulator screws)
FHD
HD
Raw display panel for use in HP 245 G5 Notebook PC models (includes insulator screws)
Antenna (includes insulator screws)
Single antenna
Dual antennas
Display bezel (includes insulator screws)
Display cable (includes display panel cable and webcam/microphone cable; includes insulator screws)
For use with FHD displays (HP Notebook PC only)
For use with HD displays
Display enclosure for use in HP Notebook PC models (includes insulator screws)
Black models
Red models
White silver models
Turbo silver models
Blue models
Display enclosure for use in HP 245 G5 Notebook PC models (includes insulator screws)
Hinges (left and right) (includes insulator screws)
Hinge (top)
Webcam/microphone module (includes insulator screws)
VGA
HD
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 26).
Spare part number
860573-001
860574-001
864838-001
813485-001
859127-001
858073-001
858074-001
858075-001
858065-001
858068-001
858067-001
858066-001
858070-001
860456-001
858076-001
858702-001
860575-001
860576-001
Component replacement procedures 53