Solutions When Only A Partial Image Appears; Solutions When The Image Is Not Rectangular - Epson Pro G7000W User Manual

Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:
• Make sure you selected the correct Screen Type setting for the screen being used.
• Make sure the Scale setting in the Extended menu is turned off.
• Try adjusting the image position using the Position menu setting.
• Try adjusting the image position using the Screen Position menu setting.
• If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the
projector returns to a full display.
• Check the cables connecting the computer or video source to the projector. Try connecting different
cables.
• Check your computer display settings to disable dual display and set the resolution within the
projector's limits. (See your computer manual for details.)
• Check the resolution assigned to your presentation files to see if they are created for a different
resolution than you are projecting in. (See your software help for details.)
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Input Signal Settings - Signal Menu
Supported Video Display Formats
Related tasks
Adjusting the Image Position Using Lens Shift
Setting the Screen Type

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:
• Place the projector directly in front of the center of the screen, facing it squarely, if possible.
• If you adjusted the projector height using the projector feet, press the keystone buttons on the
projector to adjust the image shape.
Solving Image or Sound Problems
222