Epson Pro G7000W User Manual page 210

On/Standby Status light Lamp
(power) light
Off Flashing
blue
Off Flashing
blue
Temp Filter light Status and solution
light light
Off Orange Off
Off Orange Off
210
Projector is too hot.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
• Make sure the environmental
temperature is not too hot.
Projector has overheated and
turned off. Leave it turned off to
cool down for five minutes.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug
the projector and contact Epson
for help.