Epson Pro G7000W User Manual page 211

On/Standby Status light Lamp
(power) light
Off Flashing
blue
Varies Varies
Off Flashing
blue
Flashing blue Varies
Temp Filter light Status and solution
light light
Orange Off Off
Varies Varies Flashing
orange
Off Off Orange
Varies Varies Orange
211
Lamp has a problem.
• Check to see if the lamp is
burned out, broken, or installed
incorrectly. Reseat or replace
the lamp as necessary.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug
the projector and contact Epson
for help.
It is time to clean the air filter.
Low air flow through the projector.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug
the projector and contact Epson
for help.
Low air flow through the air filter.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug
the projector and contact Epson
for help.