Epson Pro G7000W User Manual page 209

On/Standby Status light Lamp
(power) light
Blue Off
Flashing blue Off
Blue Flashing
blue
Flashing blue Varies
Varies Varies
Off Flashing
blue
Off Flashing
blue
Off Flashing
blue
Temp Filter light Status and solution
light light
Off Off Off
Off Off Off
Off Off Off
Varies Flashing Varies
orange
Flashing Varies Varies
orange
Flashing Flashing Off
orange orange
Orange Orange Off
Flashing Off Off
orange
209
Standby or network monitoring
and control (When Standby Mode
is set to Communication On.
Preparing network monitoring or
shutting down. (Wait for the light
to remain orange before
unplugging the projector.)
Cooling down. All buttons are
disabled.
High temperature warning. If the
temperature gets too high,
projection will automatically stop.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
Installation position warning.
Check the installation angle of the
projector.
Auto Iris error. Turn off the
projector, unplug it from the
electrical outlet, and contact
Epson for help
Power error (balast) or Lens Shift
error. Turn off the projector,
unplug it from the electrical outlet,
and contact Epson for help
Internal error. Turn off the
projector, unplug it from the
electrical outlet, and contact
Epson for help.