Epson Pro G7000W User Manual page 188

Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10
hours. Available settings depend on the current input source.
Setting
Projector Info
Lamp Info
Options
Source
Input Signal
Resolution
Refresh Rate
Sync Info
Status
Serial Number
Lens Type
Event ID
HDBaseT Signal Quality
Lamp Hours
188
Description
Displays the name of the port to
which the current input source is
connected
Displays the input signal setting
of the current input source
Displays the resolution of the
current input source
Displays the refresh rate of the
current input source
Displays information that may be
needed by a service technician
Displays information about
projector problems that may be
needed by a service technician
Displays the projector's serial
number
Displays the lens model number
Displays the Event ID number
corresponding to a specific
projector problem; see the list of
Event ID codes
Displays the image signal
information from the HDBaseT
port
Displays the number of hours (H)
the lamp has been used in
Normal and ECO Power
Consumption modes; if the
information is displayed in
yellow, obtain a genuine Epson
replacement lamp soon