Play Duration & Power-On Time Display; Confirm The Firmware Version; Resetting The Player - Pioneer DVD-V5000 Operating Instructions Manual

11 Additional information
Play Duration & Power-
On Time Display
This unit is capable of displaying how long the
unit has been playing discs (accumulative) and
how long the power has been turned ON.
The play time and power ON time can be
displayed as described below.
1 Press and hold DISPLAY on the front
panel of the main unit before turning
power ON then press
The following is an example:
• Power on time: 109 hours 37 minutes
• Total play time: 56 hours 58 minutes
2 When an operation (playback from the
remote, for example) is performed, the
time information disappears and normal
operation begins.
• Time is measured by the CPU clock thus the
information includes up to a 2% error
margin.
• This feature is incapable of resetting the
total play time or power ON time to a
working condition or maintenance timing of
0.
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
66
STANDBY/ON.
Confirm the Firmware
Version
1 Press HOME MENU and select "Initial
Settings" from the on-screen display.
Audio Settings
Play Mode
Initial Settings
2 Select "Option" and press DISPLAY.
The firmware version appears in the window.
Initial Settings
Digital Audio Out
Parental Lock
Video Output
Language
Display
Option
Region : 2 / Ver : 1.006(16) / AVI : 2.0/2.7
Move Select ENTER
Here, the "Ver: 1.006" indicates the version of
firmware; "(16)" indicates the capacity of the
Flash Memory (16 Mbit) being used.

Resetting the Player

Use this procedure to reset all the player's
settings to the factory default.
1 Switch the player into Standby mode.
2 Using the front panel buttons, hold
down and press
to turn the player back on.
The settings have returned to the defaults.
STANDBY/ON
Video Adjust
Disc Navigator
Level 6(us)
Exit SETUP
STANDBY/ON
PROGRESSIVE
POWER