Playing Discs; Basic Playback Controls - Pioneer DVD-V5000 Operating Instructions Manual

06

Playing discs

Chapter 6
Playing discs
Throughout this manual, the term "DVD" means
DVD-Video and DVD-R/RW. If a function is
specific to a particular kind of DVD disc, it is
specified.
1 If the player isn't already on, press
STANDBY/ON to switch it on.
If you're playing a DVD or Video CD, also
turn on your TV and make sure that it is set
to the correct video input.
/
2 Press
disc tray.
3 Load a disc.
• Load a disc with the label side facing up,
using the disc tray guide to align the disc.
• Never load more than one disc at a time.
4 Press PLAY/PAUSE
If you're playing a DVD or Video CD, a menu
may appear. See DVD-Video disc menus on
page 29 and Video CD PBC menus on page
29 for more on how to navigate these.
STANDBY/ON
STANDBY/ON
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
28
(stop, open/close) to open the
to start playback.
PROGRESSIVE

Basic playback controls

The table below shows the basic controls on the
remote for playing discs. The following chapter
covers more playback features in more detail.
Button
/
Numbers
(remote
buttons)
Disc tray
POWER PLAY PROGRAM DISC IN KEY LOCK
What it does
Starts playback.
Pauses a disc that's playing, or
restarts a paused disc.
Stops playback.
Open/close the disc tray.
Press and hold for fast reverse
scanning; press for previous
track/chapter skip.
Press and hold for fast forward
scanning; press for next
track/chapter skip.
Use to enter a title/track number.
Press ENTER to select (or wait a
few seconds).
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
Video CD ).
• If the disc is playing, playback
jumps to the start of the selected
chapter or track.
TOP MENU
STEP PLAY/PAUSE
HOME
MENU
DISPLAY
PLAY/PAUSE
STEP
MENU
ENTER
RETURN