Advanced Functions; Barcode Stack/Command Stack Settings - Pioneer DVD-V5000 Operating Instructions Manual

10 Barcode Stack / Command Stack

Advanced Functions

The barcode stack/command stack functions
can be memorized in separate groups so as not
to affect previously input commands.
For example, recording the contents of multiple
discs separately or allow multpile people to use a
single player.
Record commands in a separate group
from previously input contents
1 Create new group
At the left side of the barcode stack/
command stack input screen is the current
memory group number (ex. Group001).
This group number is necessary for
performing commands. The user should
make note of these for later reference.
2 Use a barcode reader to read barcodes
and transmit to player
The remote control unit can also be used to
input the numbers.
3 Repeat step 2 in the desired playback
order
4 After inputting the commands, retain
the data in player memory
5 Execute
Select the group number as noted in step 1.
Commands already recorded in the player's
memory can be reordered in one or more
groups.
However, the order of commands cannot be
changed.
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
50
Page 59
Page 51
Pages 50 – 56
Page 57
Page 62
Pages 60 – 61
Barcode Stack/Command Stack
Settings
DVD barcode commands are recorded by the
player. These commands can be called up to
perform continuous or step-by-step playback.
The recorded data is retained even if the power is
disconnected.
Access Barcode Stack / Command
Stack Menu
1 Press and hold HOME MENU for one
second.
The screen displays the ADV. SETUP menu.
2 Use the (cursor down) button to
select "COMMAND STACK."
3 Press ENTER.
Command Stack
Group(1-001) Command(0-000)
Group001 001
002
003
004
005
006
007
008
Move Select ENTER
• Instructions for using this menu screen are
available in the following sections.
• To set a barcode stack/command stack, use
either a barcode reader (sold separately) or
the remote control.
Exit HOME MENU