Connecting Up Rear Panel Connections - Pioneer DVD-V5000 Operating Instructions Manual

02 Connecting up
Chapter 2
Connecting up
Rear panel connections
When connecting this player up to your TV, AV receiver or other components, make sure that all
components are switched off and unplugged.
1 DIGITAL AUDIO OUT
This is a digital audio output for connection to a
PCM, Dolby Digital and/or DTS-compatible AV
receiver that has a coaxial digital input.
Connect using a commercially available coaxial
digital cable.
2 COMPONENT VIDEO OUT
This is a high quality video output for connection
to a TV, monitor or AV receiver that has compo-
nent video inputs.
Connect using a commercially available three-
way component video cable. Be careful to match
the colors of the jacks and cables for correct
connection.
3 AUDIO OUT L / R
This pair of analog audio outputs connects to
your TV, AV receiver or stereo system. Even if you
are connecting up one of the digital outputs, we
still recommend you connect these jacks.
Use the supplied audio/video cable when
connecting these jacks. Match the colors of the
jacks and cables for correct stereo sound.
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
10
8 7
1 2 3
6 5
4 AC IN
Connect the supplied power cable here, then
plug into a power outlet.
5 VIDEO OUT
This is a standard video output that you can
connect to your TV or AV receiver using the
supplied audio/video cable.
6 S (S-video output)
This is an S-video output that you can use
instead of the video output described in 5 above.
7 RS-232C
This is a RS-232C terminal (D-sub 9-pin, male).
8 EXT TERMINAL
This is a RS-232C and Extend terminal (D-sub 15-
pin, female).
You may find it useful to have the manuals
supplied with your other components handy
when connecting this player.
4