Accumulated Power-On Time And Playback Time - Pioneer DVD-V8000 Service Manual

1

7.1.7 ACCUMULATED POWER-ON TIME AND PLAYBACK TIME

Displaying the accumulated power-on time and playback time
The accumulated power-on time and playback time are displayed on the screen and the LCD when the POWER key on the
A
main unit is pressed while the DISPLAY key is held pressed.
Two meter systems are provided with this unit: one that cannot be reset (hereinafter called power-on/playback time A) and
another that can be reset (hereinafter called power-on/playback time B).
Screen display
On the screen, both power-on/playback time A and B are displayed, as shown below:
B
Power-on/playback time A
LCD display
Only Power-on/playback time A is displayed on the LCD display.
How to reset Power-on/playback time B
The power-on time (POWER ON) and playback time (PLAY) can be separately reset.
You can, for example, reset only the power-on time when the POWER SUPPLY Unit is replaced, and reset only the
playback time when the Mechanism Assy is replaced.
C
How to reset
1 Press the POWER key on the main unit while holding the DISPLAY key pressed to display the accumulated power-on
time and playback time on the screen and the LCD.
2 Press the CX key on the remote control unit for service once.
D
3 Press the CX key once or twice so that the meter count you wish to reset flashes. Then press the SEARCH key on the
remote control unit for service. The display becomes that for reset confirmation. (In the following example, only the
playback time is to be reset.)
E
To execute resetting, press the SEARCH key again.
To exit this mode without resetting, press the ESC key on the remote control unit for service.
F
98
1
2
Power-on time
Playback time
Power-on/playback time B
Flashes.
Or
Flashes.
DVD-V8000
2
3
Or, press the CX key on the remote control unit for
service twice.
3
4
Flashes.
4