Rear Panel Connections - Pioneer DV-353-K Service Manual

Rear panel connections

1
DIGITAL AUDIO OUT
Y
COAXIAL
OPTICAL
S
7 6
When connecting this player up to your
TV, AV receiver or other components,
make sure that all components are
switched off and unplugged.
1 DIGITAL AUDIO OUT – COAXIAL
This is a digital audio output for connection
to a PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver that has a coaxial
digital input.
Connect using a commercially available
coaxial digital audio cable.
2 COMPONENT VIDEO OUT
This is a high quality video output for
connection to a TV, monitor or AV receiver
that has component video inputs.
Connect using a commercially available
three-way component video cable. Be careful
to match the colors of the jacks and cables
for correct connection.
3 AUDIO OUT L / R
This pair of analog audio outputs connects to
your TV, AV receiver or stereo system. Even if
you are connecting up one of the digital
outputs, we still recommend you connect
these jacks.
Use the supplied audio/video cable when
connecting these jacks. Match the colors of
the jacks and cables for correct stereo
sound.
2 3
AUDIO OUT
P
B
L
R
P
R
COMPONENT VIDEO OUT
VIDEO OUT
5
4 AC IN
Connect the supplied power cord here, then
plug into a power outlet.
5 VIDEO OUT
This is a standard video output that you can
connect to your TV or AV receiver using the
supplied audio/video cable.
6 S (S-Video output)
This is an S-video output that you can use
instead of the video output described in 5
above.
7 DIGITAL AUDIO OUT – OPTICAL
This is a digital audio output for connection
to a PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver that has an optical
digital input.
Connect using a commercially available
optical digital audio cable.
DV-353-K
4
97