Caller List - Panasonic KX-TG5931AL Operating Instructions Manual

TG593xAL.book Page 30 Tuesday, April 11, 2006 10:31 AM
Caller ID Service

Caller list

Viewing the caller list and
calling back
1
Press {^} or {V} to enter the caller list.
2
Press {V} to search from the most
recent call, or {^} to search from the
oldest call.
3
{C}
Note:
L If you do not want to dial the area codes
when making calls from the Caller ID list,
you can store the area codes which you
want the unit to delete automatically
(page 30).
L KX-TG5932/KX-TG5933/KX-TG5934:
Each handset has its own caller list. If
you viewed the caller list or answered a
call on one handset, the same
information in the other handsets is
displayed as "missed calls".
L You can also press {Rcvd calls} to
enter the caller list.
L If the same caller calls more than once, it
is displayed with the number of times the
caller called ("×2" to "×9"). Only the date
and time of the most recent call is
stored.
L A Q is displayed next to items which
have already been viewed or answered.
L If an arrow (→ ) is displayed after the
number, the whole phone number is not
shown. Press {>} to see the remaining
numbers. To return to the previous
display, press {<}.
30
Storing your area code
We recommend storing your area code
before using Caller ID (page 28). Calls
from the same area will be recorded in the
caller list without the area code. You do not
have to remove it before calling back the
caller or storing in the phonebook.
1
{MENU} i {0}{4}
2
Enter your area code (max. 8 digits).
L To correct a digit, press {<} or {>} to
move the cursor, then press {Clear}.
Enter the correct number.
3
{Save} i {OFF}
To erase your area code
Press and hold {Clear} in step 2, press
{Save}, then press {OFF}.
Editing a caller's phone number
before calling back
You can edit a phone number in the caller
list.
1
Press {^} or {V} to enter the caller list.
2
Select the desired item. i {Select}
i {Edit}
3
Add or erase digits to the beginning of
the number as necessary.
L To add a digit, press the desired dial
key.
L To erase a digit, press {Clear} or
{#}.
4
{C}