TG593xAL.book Page 46 Tuesday, April 11, 2006 10:31 AM
Useful Information
3
Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until
it clicks into place.
4
Drive the screws (not included) into the wall using the wall mount template (see below)
as a guide. Mount the unit and slide it down into position. Connect the AC adaptor and
telephone line cord to their respective outlets (page 13).
Raise the antennas.
Wall mount template for the base unit
46
Screws
83 mm
To socket
83 mm