Panasonic KX-TG5931AL Operating Instructions Manual page 51

TG593xAL.book Page 51 Tuesday, April 11, 2006 10:31 AM
Making/answering calls, intercom
Problem
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
The handset does not
ring.
The base unit does not
ring.
I cannot make a call.
I cannot redial by
pressing {REDIAL}.
I cannot have a
conversation using the
headset.
I cannot page the
handset.
I cannot page the base
unit.
*1 KX-TG5932/KX-TG5933/KX-TG5934
Cause/solution
L Move the handset and the base unit away from other
electrical appliances.
L Move closer to the base unit.
L Raise the base unit antennas.
L Turn on the clarity booster feature (page 23).
L If your unit is connected to a telephone line with ADSL
service, we recommend connecting a noise filter
between the base unit and the telephone line socket.
Contact your ADSL provider for details.
L The ringer volume is turned off. Adjust it (page 35).
L The ringer volume is turned off. Adjust it (page 22).
L The base unit is in use. Try again later.
L Another handset is in use. Try again later.
L If the above remedies do not solve the problem, set the
dialling mode. Press {MENU} {0} {5} {1} {Save}
{OFF}.
L The unit is not designed to be used with rotary (pulse
dialling) services.
L If the last number dialled was more than 48 digits long,
the number will not be redialled correctly. Dial the
number manually.
L Make sure that an optional headset is connected
properly (page 48).
L If "SP-phone" is displayed on the handset, press {C}
to switch to the headset.
L We recommend using the Panasonic headset noted on
page 8.
L The called handset is too far from the base unit.
L The called handset is in use. Try again later.
L The base unit is in use. Try again later.
Useful Information
*1
51