Hyundai HY6222 User Manual page 19

turned down to the guide bar.
6.7.2. To release brake, pull up the front guard toward the front handle until a 'click'
sound is heard.
Make sure that you confirm the operation of the brake when carrying out the pre-use
6.8. How to confirm that the brake is operating correctly.
6.8.1. Turn off the engine.
6.8.2. Holding the chain saw horizontally, release your hand from the front handle,
hit the tip of the guide bar to a stump or a piece of wood, and confirm brake
operation. Operating level varies by bar size.
6.8.3. If the brake is not effective, ask your dealer to inspect and repair.
6.8.4. If the engine is still rotating with the brake engaged, it will overheat the clutch.
When the brake is operated while in operation, you MUST immediately release
your fingers from the throttle lever and allow the engine to run at idle.
6.9. Stopping the engine.
6.9.1. Release the throttle lever to allow the engine to idle at low speed for a few
minutes.
6.9.2. Move the engine switch (11) to the 'O' stop position.
inspection.
Page 19 Rev 2