Table of Contents
Advertisement
Useful Information
Answering system
Problem
I cannot listen to
messages from a remote
location.
The other party
complains that they
cannot leave a voice
message.
"E" flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
I cannot operate the
answering system.
During message
playback, the unit rings
and cancels playback.
The message indicator
on the handset flashes
slowly.
When you play back
messages or turn on the
answering system, the
base unit and handset
announce the day and
time incorrectly.
Battery charge
Problem
"Recharge battery" is
displayed, 7 flashes
or the handset beeps
intermittently.
"Charge for 6h" and
8 are displayed and
the handset does not
work.
60
Cause & solution
L A touch tone phone is required for remote operation.
L Press the remote code correctly and press each key
firmly (page 47).
L The answering system is off. Turn it on (page 48).
L The recording time is set to "Greeting only". Select
"1min", "2min", or "3min" (page 50).
L The memory is full. Erase unnecessary messages
(page 44).
L Message memory is full. Erase unnecessary messages
(page 44).
L Someone is operating the answering system.
L If someone is talking on a conference call, you cannot
operate the answering system. Try again later.
L A call is being received. Answer the call and start again
from the beginning after hanging up.
L New messages have been recorded. Listen to the new
messages (page 44) or turn the message alert off (page
50).
L Set the date and time again (page 17).
Cause & solution
L Fully charge the battery (page 12).
L The battery has been discharged. Fully charge the
battery (page 12).
Hide quick links:
Advertisement
Table of Contents
