Useful Features During A Call; Hold Button; Mute Button; Voice Enhancer - Panasonic KX-TG5838AL Operating Instructions Manual

Making/Answering Calls
Useful features during a
call

HOLD button

This feature allows you to put an outside
call on hold.
KX-TG5838AL:
Press {HOLD} during an outside call.
L "Hold" will be displayed.
L To return to the call, press {C} or {s}.
KX-TG5839AL:
1
Press {HOLD} during an outside call.
L To transfer the call to the other
handset, see page 32, step 2.
2
Press {HOLD} again.
L "Hold" will be displayed.
L To return to the call, press {C} or
{s}.
L The other handset user can take the
call by pressing {C} or {s}.
Note:
L "Line on hold" will be displayed on
the other handset (KX-TG5839AL only).
L If another phone is connected on the
same line (page 10), you can also take
the call by lifting its handset.
L If a call is kept on hold for more than 6
minutes, an alarm tone will start to
sound and the ringer indicator will flash
rapidly. After 4 additional minutes on
hold, the call will be disconnected.

MUTE button

You can mute your voice during a
conversation. While mute is turned on you
will be able to hear the other party, but the
other party will not be able to hear you.
20
To mute your voice, press {MUTE}.
Example:
L "<Mute>" will flash on the display.
L To return to the conversation, press
{MUTE}, {C}, or {s}.

Voice enhancer

This feature can simulate a band signal
above the normal bandwidth limitations,
achieving a sound which is close to the
actual voice. You can turn this feature on
or off, depending on the circumstance.
1
Press {MENU} during an outside call.
2
To turn this feature on or off, press {3}.
L You can also select "V.E. on" or
"V.E. off" by pressing {V} or {^}
then pressing {>}.
L When turned on, "J" will be
displayed.
Note:
L Once you turn voice enhancer on, it will
be activated for all outside calls until
turned off.
L You can also turn this feature on or off by
programming (page 36).
L Depending on the condition and quality
of your telephone line, this feature may
emphasise existing line noise. If it
becomes difficult to hear, turn this
feature off.
Talk
00-00-30 <Mute>
g3=V.E. on