Panasonic KX-TG5240AL Operating Instructions Manual page 92

TG5240AL.fm Page 92 Friday, June 11, 2004 5:22 PM
Troubleshooting
Problem
Caller ID information is not
displayed during message
playback (p. 69).
You cannot remember your
mailbox password. You cannot
retrieve the messages from
your mailbox.
92
Cause & Remedy
• Caller ID information will not be displayed
— if a message is recorded by using [MEMO]
(p. 71), or
— if a call is transferred to a mailbox and the
caller leaves a message (p. 72).
• Confirm the mailbox password using the
handset (p. 65).
• If you cannot use the handset, you can
retrieve the messages from your mailbox after
erasing the password, using the base unit;
Press [PROGRAM], [MUTE], [#], and
[9][0][0][0].
Please note that the following settings will
return to the factory preset with the Mailbox 2
and 3 passwords.
Function
Date & time
Recall time
Line mode
Answering System
Number of rings
Recording time
Remote code
Recording mode
Base unit ringer volume
Base unit ringer tone
Base unit incoming call tone 2
Base unit room monitor mode Off
Base unit Talking Caller ID
• You cannot reset the above settings to the
factory preset, if the dial lock is turned on
(p. 62). If you forget your password of dial
lock, consult your nearest Panasonic service
centre.
Factory preset
—
100ms
B mode
On
4
3 min
11
Standard (16 min)
High
Tone 1
On