TG5240AL.fm Page 79 Friday, June 11, 2004 5:22 PM
4
Adjust the adaptor to hold the base unit, then push it in the direction of
the arrow until it clicks into place.
5
Install screws using the wall template below. Connect the telephone line
cord. Mount the unit, then slide down.
• Raise the antennas.
6
To charge the handset battery:
Place the handset on the base unit.
• The unit beeps once and the CHARGE indicator lights.
Wall Template
Wall Mounting
Screws (not included)
To Telephone Plug
connected to Socket
8.3 cm
8.3 cm
79