Canceling Sleep Mode - Konica Minolta KIP 700m Hardware Operation Manual

2. 9

Canceling Sleep Mode

The KIP 700m has two Sleep Modes to reduce the power consumption.
The KIP 700m will enter Sleep Mode after a certain period of inactivity.
In the default setting;
• Warm Sleep Mode will start after a 15 minute of inactivity in order to reduce the power supply
for Fuser Unit.
• Cold Sleep Mode will start after a 60 minute of inactivity to stop the power supply for Fuser
Unit and some other components.
Sleep Mode is canceled and the machine gets ready when;
• the machine receives a print job through the network.
• you tap on the UI screen then an original is inserted the scanner unit.
NOTE
(1) It may take time for the machine to get ready.
(2) Tapping on the UI screen can cancel the screensaver but the KIP 700m needs to recover
temperature on Fuser Unit.
It may need another waiting time to start warming up for printing.
(3) Recommended Default Delay Times: 60min
2-17 Chapter 2 Basic Operation