Connecting Wires To Terminals - JVC KW-V420BT Instruction Manual

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connection
❏ Connecting wires to terminals
10 A fuse
See page 56.
1
Light blue with yellow stripe (Steering remote control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
Connector A
Connector B
* Only for KW-V420BT/KW-V320BT.
1
*
2 For 3 way speaker system connection, see also page 56.
54
USB terminal (1.0 m): See page 55.*
See page 56.
Connect the aerial cord to the aerial terminal.
Purple with white stripe
(Reverse sensor wire)
Light green (Parking sensor wire)
Connecting the ISO connectors
You may need to modify the wiring of
the supplied wiring harness as illustrated
below.
Red
(Ignition wire)
Red (A7)
Unit Vehicle
Yellow Yellow (A4)
(Battery wire)
Default wiring
1
Connect to the vehicle's reverse
lamp harness when using the
optional rear view camera.
To the OE remote adapter matching your car
• If no connections are made, do not let the cable come out from the tab.
Pin Color and functions of Connector A and B
A4 Yellow
A5 Blue with white stripe
A6 Orange with white stripe
A7 Red
A8 Black
B1/B2 Purple ª / Purple/Black · Right speaker (rear/tweeter)*
B3/B4 Gray ª / Gray/Black ·
B5/B6 White ª / White/Black ·
B7/B8 Green ª / Green/Black ·
Connect to the vehicle's parking
brake detection switch harness.
• For best safety, be sure to
3
connect the parking sensor.
Battery
Power control
Dimmer
Ignition (ACC)
Ground connection
Right speaker (front/mid range)*
Left speaker (front/mid range)*
Left speaker (rear/tweeter)*
2
2
2
2