KW-V520BT KW-V420BTM KW-V220BT KW-V520BTM KW-V320BT KW-V220BTM KW-V420BT KW-V320BTM KW-V120M MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL This instruction manual is used to describe models listed below. Model availability and features (functions) may differ depending on the country and sales area. B5A-0864-00 (MN/M2N/XN/NN)
KW-V320BT Region 3/KW-V320BT Region 5/KW-V320BTM/KW-V220BT Region 3/KW-V220BT Region 5/ been classified as Class 1. It means that the unit is KW-V220BTM/KW-V120M/KW-V520BT Region 3/KW-V520BTM), see page 55 . utilizing laser beams that are of a weaker class. There • < > indicates the various screens/menus/operations/settings that appear on the touch panel.
This is inevitable and is not considered defective. • Do not expose the monitor to direct sunlight. KW-V520BT/KW-V520BTM • Do not operate the touch panel using a ball-point pen or similar tool with a sharp tip. Touch the buttons on the touch panel with your finger directly (if you are wearing a glove, take it off).
Display the <Clock> setting screen. <User Change the display design. Customize> (Page 48) Finish the procedure. The Home screen is displayed. * Only for KW-V420BT/KW-V420BTM/KW-V520BT/KW-V520BTM. • You can also display the <Clock> setting screen by touching the clock area on the Home screen.
BASICS BASICS INITIAL SETTINGS INITIAL SETTINGS 6 FNC/ button Set the clock time. Component names and functions • Pops up the short-cut menu. (Press) (Page 12) V Caution on the volume setting: • Activates the voice dialing. (Hold) (Page 40) Digital devices produce very little noise compared 7 DISP/DISP OFF button with other sources.
BASICS BASICS KW-V320BT/KW-V320BTM 6 Volume +/– button 1 Reset button Adjusts the audio volume. (Page 8) Resets the unit. (Page 3) 7 Monitor panel* 2 Loading slot 3 M (Eject) button 8 Screen (touch panel) Ejects the disc. (Press) (Page 13) * You can change the color of the buttons on the monitor panel.
– The screen switched to depends on the <Input> setting in <Navigation Input> <Input> setting in <Navigation Input> (for KW-V220BT Region 3) (Page 34) or (for KW-V520BT Region 3/KW-V520BTM) <Navigation Input> setting for KW-V220BT (Page 34) or <Navigation Input> setting Region 4/KW-V220BT Region 5 (Page 53).
BASICS ❏ Adjusting the volume ❏ Adjusting the panel angle (only Common operations for KW-V420BT/KW-V420BTM/ To adjust the volume (00 to 35) ❏ Turning on the power KW-V420BT/KW-V420BTM KW-V520BT/KW-V520BTM) KW-V420BT KW-V320BT KW-V220BTM Display the <Angle Adjust> screen. KW-V420BTM KW-V320BTM KW-V120M On the Home screen: •...
BASICS BASICS ❏ Turning off the screen ❏ Turning on/off the AV source KW-V420BT/KW-V420BTM/KW-V220BT/ KW-V220BTM /KW-V120M/KW-V520BT/ On the pop-up short-cut menu (Page 12): You can activate the AV function by selecting a KW-V520BTM Display the pop-up short-cut menu by pressing source on the Home screen.
(Page 49) 4 Returns to the previous screen. 2 Displays the <Clock> setting screen. (Page 4) KW-V420BT/KW-V420BTM/KW-V220BT/ 3 M (Eject) button: Ejects the disc. (Press) KW-V220BTM /KW-V120M/KW-V520BT/ (Page 13) KW-V520BTM button: Displays the <User Customize> screen. (Page 48) button: Displays the <Settings> screen. (See the right column.)
Selectable only when <iPod Setup> is set to [USB 1 (Page 9) Wire]. (Page 22) [Camera] Switches to a camera connected Only for KW-V520BT Region 4/KW-V320BT Region 4/KW-V220BT to the rear view camera input. Region 4. 2 Displays the source control screen while playing (Page 31) a video.
BASICS BASICS ❏ Selecting the playback source on the For KW-V420BT/KW-V420BTM/KW-V220BT/ Using the pop-up short-cut menu KW-V220BTM /KW-V120M/KW-V520BT/ Home screen KW-V520BTM While displaying the source control screen, you can [Screen Displays the picture adjustment jump to the other screen from the pop-up short-cut Adjustment] screen.
Closing the monitor panel (only for KW-V420BT/ The source changes to “DISC” and playback starts. 6 Playback mode (Page 16) KW-V420BTM/KW-V520BT/KW-V520BTM ) • The IN indicator lights up while a disc is inserted. 7 File type After removing the disc, press M on the monitor panel.
* The appearance of the buttons differs depending on the model: window. [ ] or [ ] for KW-V420BT/KW-V420BTM/KW-V220BT / * The appearance of the buttons differs depending on the model: KW-V220BTM/KW-V120M/KW-V520BT/KW-V520BTM/[ ] or [ ] or [ ] for KW-V420BT/KW-V420BTM/KW-V220BT / ] for KW-V320BT/KW-V320BTM.
DISCS DISCS ❏ Selecting a folder/track on the list ❏ Video menu operations Displays the disc menu (DVD). [ MENU] [T MENU] You can display the video menu screen during video Displays the disc menu (DVD). playback. [Highlight] Switches to the direct disc menu •...
Randomly plays all tracks. To cancel Repeat/Random playback: Press the button repeatedly until the indicator disappears. * The appearance of the buttons differs depending on the model: [ ] for KW-V420BT/KW-V420BTM/KW-V220BT /KW-V220BTM/ KW-V120M/KW-V520BT/KW-V520BTM/[ ] for KW-V320BT/ KW-V320BTM.
DISCS DISCS ❏ Setting items <Down Mix> When playing back a multi-channel Settings for disc playback—<DISC disc, this setting affects the signals Mode> <Menu Select the initial disc menu language. reproduced through the front and/or Language> (Initial: English ) (Page 67) rear speakers.
6 File type [ ] or [ ] for KW-V420BT/KW-V420BTM/KW-V220BT / • To change settings for video 7 Current playback item information (folder no./file KW-V220BTM/KW-V120M/KW-V520BT/KW-V520BTM/[ ] or playback, see page 47. no.) ] for KW-V320BT/KW-V320BTM.
❏ Settings for USB playback—<USB ❏ Selecting a folder/track on the list <File Type>* Select the playback file type when a Mode> disc contains different types of files. • Audio: Plays back audio files. • Still Image: Plays back picture files. •...
• This unit supports the Android™ application JVC Selects repeat playback mode. Music Play. • 1: Repeats the current track. • When you use JVC Music Play, you can search for • All: Repeats all tracks. audio files by Genre, Artist, Album, Playlist, and •...
Shows/hides artwork of the Android device—<Android Mode> device. <Android • AUTO MODE: Controls from the Setup> unit (using the JVC Music Play application). • AUDIO MODE: Controls other media player applications from the Android device (without using the JVC Music Play application).
iPod/iPhone iPod/iPhone ❏ Selecting the connection method of ❏ Selecting preference settings for iPod/ Preparation iPod/iPhone iPhone playback—<iPod Mode> ❏ Connecting iPod/iPhone Turn off the AV source. (Page 9) • For details about connecting iPod/iPhone, see Display the <System> setting screen. page 62.
The appearance of the buttons differs depending on the model: 6 File type [ ] or [ ] for KW-V420BT/KW-V420BTM/KW-V220BT / 7 Track no./Total track number KW-V220BTM/KW-V120M/KW-V520BT/KW-V520BTM/[ ] or ] for KW-V320BT/KW-V320BTM. To cancel random mode, press the button repeatedly until the indicator disappears.
(Page 44) device to use on the <APP Setup> screen. 5/KW-V220BT Region 4/KW-V220BT Region 5/ [S] [T] Selects an audio/video file. KW-V120M/KW-V520BT Region 4: Select [iPhone] (Page 43) [O] [N] Reverse/forward search. for <Navigation Input> beforehand. (Page 53) When connecting the device for the first time, the...
Pandora® Pandora® (Only for (Only for KW-V320BT Region 4/KW-V220BT Region 4/KW-V520BT Region 4 KW-V320BT Region 4/KW-V220BT Region 4/KW-V520BT Region 4 ) ) Operation buttons Playback operations You can stream Pandora from iPod touch/iPhone [ ]/[ Displays the other operation button or Android devices.
Pandora® Pandora® ❏ Selecting a station from the list Android™ • You can change the page to display more items by pressing [ • Visit Google play and search for “Pandora” to Display the list selection screen. • The indicator appears on the left of the install.
Selects the AM band. window. [FM] Selects the FM band. The appearance of the buttons differs depending on the model: [ ] or [ ] for KW-V420BT/KW-V420BTM/KW-V220BT / KW-V220BTM/KW-V120M/KW-V520BT/KW-V520BTM/[ ] or Displays the preset station window. [ ]* (Page 29) ] for KW-V320BT/KW-V320BTM.
TUNER TUNER ❏ Tuning in only FM stations with strong ❏ Setting the antenna control Presetting stations signals — Local Seek You can store the antenna automatically when the ❏ Storing stations in the memory source is changed from the tuner to another source. Display the <Tuner Mode>...
❏ Activating/deactivating TI/News FM Radio Data System features Standby Reception For KW-V420BT/KW-V420BTM/KW-V220BT/ ❏ Searching for FM Radio Data System KW-V220BTM/KW-V120M/KW-V520BT/ TI Standby Reception programs—PTY Search KW-V520BTM: Select the band (1), then display the You can search for your favorite programs being broadcast by selecting the PTY code.
TUNER TUNER News Standby Reception ❏ Tracing the same program—Network- ❏ Automatic TI station seek—Auto TP Tracking Reception Seek Display the <Tuner Mode> screen. (Page 28) When driving in an area where FM reception is not When traffic information station reception is poor, sufficient enough, this unit automatically tunes in to the unit automatically searches for another station another FM Radio Data System station of the same...
On the Home screen: [ON] Displays the picture from the rear view • Only for KW-V420BT/KW-V420BTM/KW-V220BT / camera when you shift the gear to the KW-V220BTM/KW-V120M/KW-V520BT/ reverse (R) position. KW-V520BTM: You can also display the picture [OFF] Select this when no camera is...
OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS To adjust the picture Display the <Rear Camera> screen. Display the <Rear Camera> screen. (See While the camera screen is displayed... the far left column.) Display the parking guidelines adjustment screen. • The picture adjustment menu is displayed. (Page 47) To close the picture adjustment menu, touch the same area again.
OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS ❏ Changing the AV-IN name Using external audio/video You can change the AV-IN name displayed on the players—AV-IN “AV-IN” source control screen. Display the <VIDEO Mode> screen. When the operation buttons are not displayed on the screen, touch the area shown on the illustration.
The screen is switched automatically. To return to unit (Only for KW-V420BT/KW-V420BTM/ the navigation screen, press [ KW-V320BT Region 3/KW-V320BTM/KW- V220BT Region 3/KW-V220BTM/KW-V520BT Region 3/KW-V520BTM) You can connect a navigation unit (commercially available) to the NAV input terminal so that you can To exit the navigation screen view the navigation screen.
BLUETOOTH BLUETOOTH (Only for (Only for KW-V420BT/KW-V420BTM/KW-V320BT/KW-V320BTM/KW-V220BT/KW-V220BTM/KW-V520BT/KW-V520BTM KW-V420BT/KW-V420BTM/KW-V320BT/KW-V320BTM/KW-V220BT/KW-V220BTM/KW-V520BT/KW-V520BTM) ) Auto pairing Information for using Bluetooth® About mobile phones compatible with Phone When <Auto Pairing> is set to [ON], iOS devices book Access Profile (PBAP) devices (such as iPhone) are automatically paired when If your mobile phone supports PBAP, you can connected via USB.
BLUETOOTH BLUETOOTH Pairing a Bluetooth device using a PIN code (for Select the unit ( “Car Multimedia”) on your Change the PIN code. Bluetooth 2.0) • If you wish to skip changing the PIN code, go Bluetooth device. Display the <Bluetooth Setup> screen. to step 3.
BLUETOOTH BLUETOOTH ❏ Connecting/disconnecting a registered Select [ON] (to connect) or [OFF] (to • When a Bluetooth mobile phone is connected, the signal strength and battery level are displayed Bluetooth device disconnect) for the target (1), then display when the information is acquired from the device. the <Paired Device List>...
(only for KW-V420BT/KW-V420BTM/ • To adjust the noise reduction volume (between KW-V320BT Region 3/KW-V320BTM/KW-V220BT −5 to 5, initial: 0) : Adjust <NR LEVEL>. Region 3/KW-V220BTM/KW-V520BT Region 3/ • To adjust the echo volume (between −5 to 5, KW-V520BTM) initial: 0): Adjust <EC LEVEL>.
Access Profile (PBAP), the call history and the phone book are not For KW-V420BT/KW-V420BTM/KW-V220BT / While talking... displayed. KW-V220BTM/KW-V520BT/KW-V520BTM: From the call history/phone book/preset list For KW-V320BT/KW-V320BTM: • Only for KW-V320BT/KW-V320BTM: You can also display the phone control screen by...
• You can also activate voice dialing by holding pressed. FNC/ (for KW-V420BT/KW-V420BTM/ Select a phone number to call. KW-V220BT/KW-V220BTM/KW-V520BT/ KW-V520BTM ) or HOME/ (for KW-V320BT/ KW-V320BTM) on the monitor panel. Say the name of the person you want to Select a phone number from the list.
Playback information Select a preset number to store into. [ ] or [ ] for KW-V420BT/KW-V420BTM/KW-V220BT / 1 Tag data (current track title/artist name/album KW-V220BTM/KW-V120M/KW-V520BT/KW-V520BTM/[ ] or title)* ] for KW-V320BT/KW-V320BTM. • Pressing [ H] scrolls the text if not all of the text The random and repeat functions vary depending on the Bluetooth is shown.
BLUETOOTH BLUETOOTH ❏ Selecting an audio file from the menu <Device Shows the device address of the unit. Address> <Auto • ON (Initial): A connection is Connect> automatically established with the last connected Bluetooth device when the unit is turned on. Select a category (1), then a desired item •...
Android device (1), then press [OK] to for KW-V420BT/KW-V420BTM/KW-V320BT/ connect (2). KW-V320BTM/KW-V220BT/KW-V220BTM/ KW-V520BT/KW-V520BTM) Before using applications of iPod touch /iPhone/ Android such as Pandora, select the device to use. When connecting the device for first time, the setup screen (for connection, etc.) appears. Follow the procedure on the setup screen to configure the settings.
Display the <X’over Network> screen. Display the <Equalizer> screen. • For KW-V420BT/KW-V420BTM/KW-V220BT / On the Home screen: KW-V220BTM/KW-V120M/KW-V520BT/ KW-V520BTM: Press FNC and volume + on the The adjustments are stored and <User> is monitor panel at the same time. activated.
SETTINGS SETTINGS ❏ Setting the speakers—car type, Select the speaker type (1), select the size <TW Gain (L)>/ Adjusts the output volume of <TW Gain (R)> speaker size and crossover frequency the tweeter (left/right). * of the selected speaker (2), then display <TW FREQ>...
SETTINGS SETTINGS ❏ Adjusting the Digital Time Alignment Select an item to make an adjustment. Determining the value for <Position DTA> (DTA) adjustment If you specify the distance from the center of the Make fine adjustments to the delay time of currently set listening position to every speaker, the speaker output to create a more suitable the delay time will be automatically computed...
16:9 signal • You can also display the picture adjustment screen by selecting [Screen Adjustment] (for KW-V420BT/KW-V420BTM/KW-V220BT/ <JUST> For viewing 4:3 pictures KW-V220BTM/ KW-V120M/KW-V520BT/ naturally on the wide screen KW-V520BTM)/[Picture Adjust] (for KW-V320BT/KW-V320BTM) on the pop-up 4:3 signal 16:9 signal short-cut menu (Page ...
<User Customize> screen by Panel color is selectable only for KW-V420BT/KW-V420BTM/KW- selecting [User Customize] on the pop-up the zooming frame (2). V320BT/KW-V320BTM/KW-V520BT/KW-V520BTM. short-cut menu (Page 12). Store your own scene beforehand. (Page 49) Only for KW-V420BT/KW-V420BTM/ Store your own color adjustment beforehand. (Page 49)
Customizing the Home screen (only for KW-V420BT/KW-V420BTM/ You can arrange the items to display on the Home KW-V320BT/KW-V320BTM/ screen. KW-V520BT/KW-V520BTM) Display the <HOME Customize> screen. Select [Panel Color] on the <User On the Home screen: Customize> screen. (Page 48) • Press [ ] repeatedly to change the page on Adjust the image.
SETTINGS SETTINGS ❏ Updating the system Customizing the system settings You can update the system by connecting a USB ❏ Memorizing/recalling the settings device containing an update file. • You can memorize the settings changed in the Create an update file and copy it to a USB <...
SETTINGS SETTINGS ❏ Adjusting the touch position Touch the center of the marks at the upper left (1), the lower center (2), then the You can adjust the touch position on the touch panel if the position touched and the operation upper right (3) as instructed.
Select the car type/speaker size and adjust the Only for KW-V420BT/KW-V420BTM/KW-V320BT Region 3/ compression to a realistic sound. crossover frequency. (Page 45) KW-V320BTM/KW-V220BT Region 3/KW-V220BTM/KW-V520BT – OFF/ON (Initial) Region 3/KW-V520BTM. You cannot change the setting when “ Tuner” is selected as the source.
5/KW-V220BT Region 4/KW-V220BT Region 5/ Change the display design. (Page 48) Adjust the panel angle. (Page 8) KW-V120M/KW-V520BT Region 4: <OSD Clock> – iPhone: Switches to the screen of App from • ON: Displays the clock while a video source is...
<iPod Setup> the power, then turn on to enable the change. Specify the connection method of iPod/iPhone. Only for KW-V420BT/KW-V420BTM/KW-V320BT/KW-V320BTM/ (Page 22) KW-V220BT/KW-V220BTM/KW-V520BT/KW-V520BTM. <APP Setup>* Only for KW-V420BT Region 3/KW-V420BTM/KW-V320BT Region Configure the App settings. (Page 43) 3/KW-V320BTM/KW-V220BT Region 3/KW-V220BTM/KW-V520BT Region 3/KW-V520BTM.
Preparation For KW-V320BT Region 4/KW-V220BT Region 4/ • Keep the battery out of reach of children and in KW-V520BT Region 4: To use the remote controller, ❏ Removing the battery sheet original package until ready to use. Dispose of purchase RM-RK258 separately.
• To erase a misentry, press CLR (clear). KW-V320BTM/KW-V220BT/KW-V220BTM/KW-V520BT/ VOL +/ 3 Press ENT to confirm the selection. Adjusts the volume level. KW-V520BTM only. VOL – Available for KW-V420BT/KW-V420BTM/KW-V520BT/KW-V520BTM • To exit the search mode, press DIRECT, FM/J, or Selects the source. only. AM/K. Starts/pauses* playback.
REMOTE CONTROLLER REMOTE CONTROLLER Display the <Steering Remote Control • The unit can register/change all of the buttons’ Using the steering remote functions at the same time. To do this, press each Setting> screen. controller button in turn and after pressing all of them, •...
CONNECTION/INSTALLATION Before installing the unit CAUTION WARNING ❏ Supplied accessories for installation Precautions on installation and connection Only for KW-V420BT/KW-V420BTM/KW-V320BT/KW-V320BTM/ KW-V220BT/KW-V220BTM/KW-V120M. Only for KW-V420BT/KW-V420BTM/KW-V320BT/KW-V320BTM/ KW-V220BT/KW-V220BTM/KW-V520BT/KW-V520BTM. · ª ·...
CONNECTION/INSTALLATION ❏ Installation procedure ❏ Installing in Toyota cars (only for Installing the unit KW-V520BT/KW-V520BTM) ❏ Installing the unit using the mounting · bracket removed from the car (only for KW-V420BT/KW-V420BTM/ KW-V320BT/KW-V320BTM/ KW-V220BT/KW-V220BTM/KW-V120M) 4 or 5 Car Bracket Car Bracket 4 or 5 ·...
CONNECTION/INSTALLATION Connection ❏ Connecting wires to terminals (for KW-V420BT/KW-V420BTM/KW-V320BT/KW-V320BTM/KW-V220BT/KW-V220BTM/KW-V120M) Only for KW-V420BT/KW-V420BTM/KW-V320BT/KW-V320BTM/KW-V220BT/ USB terminal (1.0 m): See page 62.* KW-V220BTM. See page 63.* Only for KW-V420BT/KW-V420BTM/KW-V320BT Region 3/KW-V320BTM/ See page 63. 10 A fuse KW-V220BT Region 3/KW-V220BTM. Only for KW-V420BT/KW-V420BTM/KW-V320BT/KW-V320BTM. For 3 way speaker system connection, see also page 63. If no connections are made, do not let the cable come out from the tab.
CONNECTION/INSTALLATION ❏ Connecting wires to terminals for Toyota Cars (for KW-V520BT/KW-V520BTM) 10 A fuse Connector D USB terminal (1.0 m): See page 62. See page 63. Purple with white stripe (Reverse sensor wire) See page 63.* Light green (Parking sensor wire) See page 63.
CONNECTION/INSTALLATION ❏ Connecting a USB device ❏ Connecting an Android device ❏ Connecting iPod/iPhone USB device iPod/iPhone (Lightning iPod/iPhone (30-pin Android device (commercially available) connector models) connector models) (commercially available) (commercially available) (commercially available) KS-U62 (optional accessory) KW-V220BT KW-V220BTM USB 2.0 cable 1.0 m KW-V120M 0.8 m...
When connecting an external amplifier, connect its ground wire to V420BTM/KW-V320BT/KW-V320BTM/ the chassis of the car; otherwise the unit may be damaged. KW-V220BT/KW-V220BTM/KW- Only for KW-V420BT/KW-V420BTM/KW-V320BT Region 3/ V520BT/KW-V520BTM) KW-V320BTM/KW-V220BT Region 3/KW-V220BTM/KW-V520BT Region 3/KW-V520BTM. Connecting external amplifiers for 3 way speakers system Tweeter preout Mid range preout...
REFERENCES ❏ To keep discs clean Maintenance More information Dirty discs may not play correctly. ❏ Caution on cleaning the unit ❏ If a disc does become dirty, wipe it with a soft cloth Playing DivX files Do not use any solvent (for example, thinner, in a straight line from the center to the edge.
REFERENCES ❏ Disc playback – extension code <.jpg> or <.jpeg>. format. Disc type Recording format, – – DVD Video* and voice format. – DTS sound cannot be its resolution. reproduced or emitted from Media® Audio. this unit. – be played. –...
REFERENCES Unplayable discs ❏ About data stored in the connected The maximum number of characters (when the Unplayable disc types and formats are as follows: characters are 1 byte): USB device/iPod/iPhone/Android – DVD-Audio/DVD-ROM discs – Folder names: 50 characters We bear no responsibility for any loss of data in –...
REFERENCES REFERENCES ❏ Language codes (for DVD language selection) – iPhone 5C* – iPhone 5* Afar Galician Maori Somali – iPhone 4S Abkhazian Guarani Macedonian Albanian – iPhone 4 Afrikaans Gujarati Malayalam Serbian – iPhone 3GS Ameharic Hausa Mongolian Siswati –...
REFERENCES REFERENCES “Connection Error”: “Please update Pandora App”: Error message list • The device is registered but the connection has • The Pandora application on your iPod touch/ failed. Connect the registered device. (Page 37) iPhone/Android is not the latest version. Update If an error occurs while using the unit, a message the application.
• Replace the battery. • Add appropriate extension codes to the file names. * For KW-V320BT Region 4/KW-V220BT Region 4/KW-V520BT Region 4: Purchase RM-RK258 separately. Tracks on the Recordable/Rewritable discs are not played back as you have intended them to play.
Other cables cannot be used. Region 4). [AUTO MODE]. • Select [USB+AV-IN] for <iPod Setup>. • Make sure JVC Music Play APP is installed on the (Page 22) Android device. • Reconnect the Android device and select the appropriate control mode.
0.010% (1 kHz) • Turn off, then turn on the unit. Picture Size (W x H) (When the sound is not yet restored) connect the KW-V420BT/KW-V420BTM/KW-V520BT/ Signal to Noise Ratio player again. 99 dB (DVD-Video 96 kHz) KW-V520BTM: 6.95 inches (diagonal) wide...
USB Standard USB 2.0 Full Speed/High Speed Equalizer KW-V320BT/KW-V320BTM/ Band (13 Band): Compatible Device KW-V220BT/KW-V220BTM/ Frequency (Hz) (BAND1-13) Mass Storage Class KW-V520BT/KW-V520BTM) 62.5/100/160/250/400/630/1k/ File System FAT 16/32 1.6k/2.5k/4k/6.3k/10k/16k Maximum Power Supply Current Technology Bluetooth 3.0 Level −09 to +09 (−9 dB to +9 dB) DC 5 V 1.5 A...
Frequency Range (50 kHz) Operating Voltage Region 4/KW-V220BT Region 3/ 87.5 MHz to 108.0 MHz 14.4 V (10.5 V to 16 V allowable) KW-V220BT Region 4/KW-V520BT) Maximum Current Consumption Usable Sensitivity (S/N: 30 dB, 22.5 kHz) 10 A Frequency Range (9 kHz) 6.2 dBf (0.56 μV/75 Ω)
Bluetooth SIG, Licensing Corporation registered in the US, Japan STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) Inc. and any use of such marks by JVC KENWOOD and other countries. DECODING MPEG-4 VIDEO THAT WAS ENCODED Corporation is under license. Other trademarks •...