JVC KW-V420BT Instruction Manual page 56

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
❏ Connecting external components
1 iPod/AV-IN input
• Connect the following type of 4-pole mini
plug:
1 Left audio
1 3
2 Right audio
3 Ground
24
4 Composite video
2 Video output (Yellow)
3 Rear preout*
• Audio left output (White)
• Audio right output (Red)
4 Front preout*
• Audio left output (White)
• Audio right output (Red)
5 Subwoofer preout*
• Subwoofer left output (White)
• Subwoofer right output (Red)
6 Rear view camera input (Yellow)
* When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
56
Connecting external amplifiers for 3 way
speakers system
Tweeter preout
Mid range preout
Woofer preout
Speaker
RCA cable (not supplied)
*
* When connecting to an external amplifier, connect its ground wire
to the car's chassis.
❏ Connecting microphone for Bluetooth
Connect the microphone (5) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
5