Basics; Component Names And Functions - JVC KW-V420BT Instruction Manual

INITIAL SETTINGS INITIAL SETTINGS
3
Set the clock time.
<Radio Data Synchronizes the clock time with
System> FM Radio Data System .
<OFF>
Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to "00".
4
Finish the procedure.

BASICS

BASICS

Component names and functions

V Caution on the volume setting:
Digital devices produce very little noise compared
with other sources. Lower the volume before
playing these digital sources to avoid damaging
the speakers by sudden increase of the output
level.
KW-V420BT
1 Screen (touch panel)
2 Monitor panel*
3 VOLUME –/+ button
Adjusts the audio volume. (Page 7)
4 ATT button
Attenuates the sound. (Page 7)
5 HOME/ button
• Displays the Home screen. (Press) (Page 9)
• Turns on the power. (Press) (Page 7)
• Turns off the power. (Hold) (Page 7)
6 FNC/ button
• Pops up the short-cut menu. (Press)
(Page 11)
• Activates the voice dialing. (Hold) (Page 36)
7 DISP/DISP OFF button
• Switches the screen. (Press)
– The screen switched to depends on the
<Navigation Input> setting (Page 49).
• Turns off the screen. (Hold) (Page 8)
• Turns on the screen. (Hold) (Page 8)
8 M (Eject) button
Ejects the disc. (Tilts the monitor panel fully.)
(Page 12)
9 Reset button
Resets the unit. (Page 3)
* You can change the color of the buttons on the monitor panel.
(Page 44)
ENGLISH 5